Weslo WLEL31216 Owner's Manual

USER’S MANUALweslo.comSerial Number DecalModel No. WLEL31216.2Serial No. Write the serial number in the space

10676. Attach a Pedal (19) to the Left Pedal Leg (8) with four M6 x 14mm Screws (81); start all the Screws, and then tighten them. Repeat this step

1188. Tip: Avoid pinching the wires. With the help of a second person, attach the Frame (1) to the Base (6) with four M10 x 20mm Screws (77); start a

1210. Orient a Handlebar (4) as shown. Press and hold down the adjustment pin (D), insert the Handlebar (4) into the Left Climbing Carriage (3), and

1312. The Console (58) can use two AA batteries (not included); alkaline batteries are recommended. Do not use old and new batteries together or alkal

14HOW TO ADJUST THE RESISTANCE OF THE PEDALSTo change the resistance of the pedals, turn the adjustment collars (A) on the upper ends of the resis-tan

15HOW TO LEVEL THE STEPPER CLIMBERIf the stepper climber rocks slightly on your floor during use, turn one or both of the level-ing feet (D) beneath t

16FEATURES OF THE CONSOLEThe easy-to-use console features five modes that pro-vide instant exercise feedback during your workouts. Scan (SCAN)—This mo

17 As you exercise, the console will provide instant feedback. If you have set a workout goal, the display will show zeros when you reach your goal;

18MAINTENANCERegular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the stepper

19These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician.

2WARNING DECAL PLACEMENTThis drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this ma

20SUGGESTED STRETCHESThe correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce.1. Toe Touch Stretch

21Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *The

2214532432313436383839333537404041414346165050525245424844474951545456585353555760638163666665655962625964646720828282828282768882828287 89 90EXPLODED

23681012799111414161619181819131515171717172221232626283025612427272729686869696970727174676778787979737375777780818182828283EXPLODED DRAWING BModel N

Part No. 390988 R0318A Printed in China © 2017 ICON Health & Fitness, Inc.To order replacement parts, please see the front cover of this manual.

3IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnin

4 STANDARD SERVICE PLANS

5BEFORE YOU BEGINHandlebarAdjustment PinResistance KnobResistance CylinderAdjustment CollarPedalLeveling FootConsoleThank you for selecting the new WE

6M8 Locknut(69)–3M10 Locknut (74)–1M8 x 16mm Screw (78)–2M4 x 16mmScrew (82)–6M10 x 20mm Screw (77)–4M10 x 73mm Bolt (75)–1M8 x 40mm Bolt (80)–2M8 x 3

7• To hire an authorized service technician to assemble this product, call 1-800-445-2480.• Assembly requires two persons.• Place all parts in a cl

82. Pivot the Base Leg (10) away from the Base (6) and orient the parts as shown. Secure the Base Leg (10) with an M10 x 73mm Bolt (75) and an M10 L

94. Orient the Front Stabilizer (13) so that the welded tubes (B) are in the locations shown. Attach the Front Stabilizer (13) to the Base Leg (10)