Weslo Momentum 750 Elliptical User Manual download pdf (Page 5)

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a phillips screwdriver , an adjustable

rench , and a rubber mallet .

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.

The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on

page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been

pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M10 Split

Washer (59)–2

M10 Nylon

Locknut (33)–6

M8 Nylon

Locknut (38)–4

M10

Washer (35)–2

M10 x 25mm

Patch Screw (22)–2

M6 x 48mm Flat Head

Bolt (36)–4

M4 x 16mm

Screw (42)–4

Pedal Arm Bolt Set (40)–2

M8 x 38mm Button Bolt (50)–4

M10 x 75mm Carriage Bolt (34)–4M10 x 68mm Button Bolt (48)–2

1. Identify the Front Stabilizer (10), which is narrower than

the Rear Stabilizer (not shown). Whilst another person

lifts the front of the Frame (1), attach the Front

Stabilizer to the Frame with two M10 x 75mm Carriage

Bolts (34) and two M10 Nylon Locknuts (33).

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Weslo Momentum 750 Elliptical User Manual Page 5