Weslo WLTL29306.0 User Manual download pdf (Page 12)

[]

Follow your progress with the displays.

The lower left

display--As you exer- |

cise, the lower left dis-

play can show the

elapsed time and the

distance that you have

walked or run.

The lower right dis-

play--The lower right

display can show the

approximate number of

caloriesthat you have

burned and the speed

of the walking belt.

The upper

display--The

upper display

can showthe

elapsed time,

the distance

that you have walked or run,the approximate num-

ber of caloriesthat you have burned, or the speed

of the walkingbelt. Press the Display buttonre-

peatedly untilthe upper displayshowsthe informa-

tion that you are most interestedinviewing. Note:

While informationis shown inthe upperdisplay,

the same information will not be shown inthe

lower left or lower rightdisplay.

To reset the displays, pressthe Stop button, re-

move the key, and then reinsertthe key.

Note: The console can

display speed and dis- J_"

tance in either miles or I--

kilometers. To see

which unit of measure-

ment is selected, first

remove the key intothe console. Next, hold down

the Stop button, insert the key, wait until you hear

a tone, and then release the Stop button. An "E"

for English miles or an "M" for metric kilometers will

appear in the upper display. Press the Speed

Increase button to change the unit of measure-

ment, if desired. When the desired unit of mea-

surement is selected, remove the key and then

reinsert it into the console.

When you are finished exercising, remove the

key from the console.

Step onto the foot mils,press the Stop button, and

removethe key. Keep the key in a secure place.

Then, switch the reset/off circuit breaker to the

"off" position and unplug the power cord.

HOW TO CHANGE THE INCLINE OF THE TREADMILL

To vary the intensity of your exercise, you can change

the incline of the treadmill. There are three incline lev-

els. Before changing the incline, remove the key

and unplug the power cord. Next, fold the treadmill

to the storage position(see page 13).

To change the incline,first remove the incline pin from

one of the incline legs. Adjust the incline leg to the de-

sired position, and then fully reinsert the incline pin.

Adjust the other incline leg in the same way. CAUTION;

Before using the treadmill, make sure that both in-

cline legs are at the same height and that both in-

cline pins are fully inserted into the incline legs.

Incline

Pin_

After you have adjusted the incline legs, lower the

treadmill (see page 14).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Comments to this Manuals

No comments

Weslo WLTL29306.0 User Manual Page 12

Comments to this Manuals

Related products and manuals for Treadmills Weslo WLTL29306.0