Weslo Cadence 935 User Manual download pdf (Page 14)

THE PERFORMANT LUBE

WALKING BELT

Your treadmill features a walking belt coated with PERFORMANT LUBE

, a high-performance lubricant. IMPOR-

TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They

will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or

break down, earthing provides a path of least resistance for

electric current to reduce the risk of electric shock. This product

is equipped with a cord having an equipment-earthing conductor

and a earthing plug. Plug one end of the cord into the treadmill.

Plug the power cord into an appropriate outlet that is prop-

erly installed and earthed in accordance with all local codes

and ordinances.

Use only a power cord type H05VV-F with a conductor of at least 1mm

, with a country recognised plug and an

appliance coupler.

HOW TO CHANGE THE INCLINE OF THE TREADMILL

To vary the intensity of your exercise, the incline of the treadmill can be changed.

There are three different incline levels. Before changing the incline, remove

the key and unplug the power cord.

To change the incline of the treadmill, first hold the rear roller endcap with one

hand and raise the back of the treadmill a few inches. Using your other hand,

rotate the incline leg to one of the three incline positions. The inset drawing at the

right shows the incline leg rotated to the Òmax fat burnÓ position. This position is

ideal for maximum fat burning. For a less intense fat burning workout, rotate the

incline leg to the Òfat burnÓ position. For aerobic exercise, rotate the incline leg to

the ÒaerobicÓ position. When you have turned the incline leg to the desired posi-

tion, lower the treadmill. Make sure that the incline leg is resting flat on the floor.

DANGER: Improper connection of the

equipment-earthing conductor can result in an

increased risk of electric shock. Check with a quali-

fied electrician or serviceman if you are in doubt as to

whether the product is properly earthed. Do not modi-

fy the plug provided with the productÑif it will not fit

the outlet, have a proper outlet installed by a qualified

electrician.

FUSED

OPERATION AND ADJUSTMENT

Incline

Leg

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Weslo Cadence 935 User Manual Page 14