Weslo 840 WCTL84091 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
STEP BY STEP CONSOLE OPERATION
Before operating the console, make sure that the
power cord is properly plugged in.
Next, step onto the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothing.
Follow the steps at the right and on page 10 to operate
the console.
Insert the key fully into the power switch.
Note: The displays will not be activated when the
key is first inserted, unless batteries were just
installed.
Press the on/reset button.
The two displays will
be activated. Note: If
batteries were just
installed, the dis-
plays will already be
activated.
Reset the speed control and start the walking
belt.
Slide the speed
control fully to
the left, to the
RESET posi-
tion. Next, slide
the control to
the right until
the walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin
walking. Change the speed of the walking belt as
desired by sliding the speed control.
To stop the walking belt, slide the speed control to
the RESET position.
3
2
1
9
CAUTION: Before operating the
console, read the following important precau-
tions.
• Do not stand on the walking belt when turn-
ing on the power.
• Always wear the clip while operating the
treadmill. When the key is removed from the
console, the power will shut off.
After the speed control knob is moved, there
will be a pause before the walking belt begins
to move. Adjust the speed in small incre-
ments until you are familiar with the treadmill.
• To reduce the risk of electric shock, keep
the console dry, avoid spilling liquids on the
console, and use only a sealed water bottle.
DIAGRAM OF THE CONSOLE
Key
Speed Control
Pulse Sensor
Display
Display
Clip
Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.
On/Reset
Button
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments